| Processable materials |
Zirconia, wax, PMMA, composite, PEEK, gypsum, fiber reinforced resin, CoCR sintered metal |
| Loadable workpiece shapes |
Step range: 98.5 mm (3.88 in.) (diameter), height 10 mm (0.39 in.)
Body range: 95 mm (3.74 in.) (diameter), height max 45 mm (1.77 in.)
Pin diameter 6 mm |
| Loadable workpiece weight |
850 g or less |
| Number of adapters in the housing |
6 |
| Operating Speed |
XYZ axes: 6 to 1800 mm/min. (0.24 to 70.9 in./min.) |
| Spindle Motor |
Brushless DC Motor |
| Spindle Speed |
6000 - 30000 UpM |
| Traverse angle of rotary axis (A) |
± 360° |
| Traverse angle of the rotary axis (B) |
± 30° |
| Number of cutters in the housing |
15 |
| Shank diameter (attachable cutters) |
4mm |
| Length (attachable cutters) |
40 - 55 mm (1.57 to 2.17 in.) |
| Compatible compressed air |
0,02 to 0,2 MPa |
| Interface |
USB |
| Control command set |
RML-1, NC Code |
| Required voltage |
AC 100 V to 240 V ± 10%, 50/60 Hz (Overvoltage Category: II, IEC 60664-1), 2.0 A |
| Power consumption |
Approx. 200 W |
| Noise Level |
Operating 70 dB (A) or less (outside working Hours), Standby 48 dB (A) or less |
| External dimensions |
880 mm (w) x 660 mm (d) x 600 mm (h) (additional 150 mm in depth required for suction tube) |
| Weight |
105 kg |
| Installation Environment |
Indoor use. Altitude: up to 2000 m (6562 ft.), Temperature: 5 to 40 C° (41-104 °F), Humidity 35 to 80% (no condensation), Environmental pollution level: 2 (as specified in IEC 60664-1). Short-term temporary overvoltage: 1440 V, Long-term temporary overvoltage: 490 V |
| Scope of delivery |
Power cord, USB cable, manuals, DGSHAPE software package on CD, sensor pen, automatic correction device, material holder, material rack, Pin_typ holder, hex wrench, wrench (for spindle), cutter holder, cutter positioner, cleaning tool, holder labels, dust extraction hoses, Adapter for hoses for dust extraction, controller, cleaning brush, etc. |
