Processable materials |
Zirconia, wax, PMMA, composite resin, PEEK, PEKK, plaster, glass fiber reinforced resin, CoCr sintered metal, polycarbonate |
Loadable workpiece shapes |
Disc type: Level range: 98.5 mm (3.88 in) (diameter), height 10 mm (0.39 in) Body area: 95 mm (3.47 in) (diameter), height max. 60 mm (2.36 in)
Pin type: Pin diameter: 6 mm (0.24 in) *The optional adapter for ZV-52D pin type blanks is required.
|
Operating Speed |
6 to 1,800 mm/min (0.24 to 70.9 in/min) |
Spindle Motor |
Brushless DC motor |
Spindle Speed |
6,000 - 30,000 rpm |
Rotary axis movement angle |
A: ± 360°, B: ± 30° |
Number of attachable cutters |
15 |
Attachable cutter |
Shank diameter: 4 mm (0.16 in), length: 40 to 55 mm (1.57 to 2.17 in) |
Compatible compressed air |
0,02 to 0,2 MPa |
Interface |
USB |
Control command set |
RML-1, NC Code |
Power supply |
100 to 240 VAC ± 10%, 50/60 Hz (overvoltage category: II, IEC 60664-1), 2.0 A |
Power consumption |
Approx. 200 W |
Operating noise |
During operation 70 dB (A) or less (outside the processing times), Standby 45 dB (A) or less |
External dimensions |
495 mm (w) x 660 mm (d) x 600 mm (h) |
Weight |
67 kg (1477 lb) |
Installation Environment |
Use in enclosed spaces up to 2,000 m above sea level, temperature: 5 to 40 °C, humidity: 35 to 80% (no condensation), environmental pollution level: 2 (according to IEC 60664–1) Short-term temporary overvoltage: 1,440 V, continuous overvoltage: 490 V |
Scope of delivery |
Power cord, USB cable, manual, CD with DGSHAPE software package, detection pen, automatic correction device, six hex screwdriver, wrench (for clamp), wrench (for spindle), cutter holder, cutter positioner, dust collection hose, dust collection hose adapter, regulator, air hose, collet mounting device, brush, etc. |