Machinable materials |
Glass ceramics, composite resins, sintered zirconia, PMMA, PEEK, titanium |
Loadable workpiece shapes |
40 mm (W) x 20 mm (D) x 20 mm (H) (1.5" x 0.8" x 0.8") |
Operating speed (XYZ axes) |
6 - 1,800 mm/min (0.24 - 70.9 in/min) |
Spindle Speed |
15,000 - 60,000 U/min |
Rotation axis (A) |
± 360° |
Number of integratable grinding heads |
6 |
Shank Diameter |
3 mm |
Required compressor specification
(oil-free, with dryer) |
0.18 to 0.22 MPa |
Interface |
USB or Ethernet (10 BASE-T/100 BASE-TX automatic switching) |
Control command sets |
RML-1, NC code |
Power supply |
AC 100 - 240 V ± 10 %, 50/60 Hz (overvoltage category: II, IEC 60664-1), 2.1 A |
Power consumption |
Approx. 190 W |
Usable tools |
Shank diameter: 3 mm, special wet grinding tools |
Noise Level |
In operation 70 dB or less (between cutting operations), In standby 48 dB or less |
External dimensions |
482 mm (W) X 560 mm (D) X 600 mm (H) (19" x 22" x 23.6") |
Weight |
61 kg (135 lb.) |
Installation Environment |
Indoor use up to 2,000 m above sea level, temperature 5 - 28 °C (41 - 82 °F), humidity: 35 - 80 % rel. (no condensation), pollution degree 2 (according to IEC 60664-1), temporary overvoltage: 1440 V, permanent overvoltage: 490 V |
Scope of deliveryScope of deliveryScope of delivery |
Starter kit (15 cutters, cleaning additive, coolant additive), 6-position clamping block, basic kit for manufacturing individual abutments, power cord, USB cable, identification pin, controller, safety instructions, quick start guide, automatic correction device, hexagonal screwdriver, multi-pole terminal, etc. |