| Processable materials |
Zirconia, Wax, PMMA, Composite resin, PEEK, PEKK, Gypsum, Glass-fiber reinforced resin, CoCR sintered metal, Polycarbonat |
| Loadable workpiece shapes |
Step range: diameter 98.5 mm (3.88 in.), height 10 mm ± 0,3 mm (0.39 in. ± 0,01 in.)
Body range: diameter 95 mm (3.74 in.), height max 60 mm (2.36 in.)
Pin diameter 6 mm (0.24 in.) |
| Loadable workpiece weight |
850 g (1.87 lb.) or less |
| Number of adapters in the housing |
1 |
| Operating Speed |
X,Y: 3,000 mm/min. (118.11 in./min.) max., Z: 2,700 mm/min (106.29 in./min) max. |
| Spindle Motor |
Brushless DC Motor |
| Spindle Speed |
6,000 - 30,000 rpm |
| Traverse angle of rotary axis (A) |
± 360° |
| Traverse angle of the rotary axis (B) |
± 35° |
| Number of cutters in the housing |
15 |
| Shank diameter (attachable cutters) |
4 mm (0.16 in.) |
| Length (attachable cutters) |
40 - 55 mm (1.57 to 2.17 in.) |
| Compatible compressed air |
0,4 MPa |
| Interface |
USB |
| Control command set |
RML-1, NC Code |
| Required voltage |
100 to 240 VAC ± 10 %, 50/60 Hz (overvoltage category: II, IEC 60664-1), 1.8 A |
| Power consumption |
Approx. 170 W |
| Noise Level |
During operating 70 dB (A) or less (when not cutting), Standby 48 dB (A) or less |
| External dimensions |
555 mm (w) x 725 mm (d) x 705 mm (h) (21.85 x 28.54 x 27.76 in.) |
| Weight |
105 kg (231.49 lb.) |
| Installation Environment |
Indoor use. Altitude: up to 2000 m (6562 ft.), Temperature: 5 to 40 C° (41-104 °F), Humidity 35 to 80% (no condensation), Environmental pollution level: 2 (as specified in IEC 60664-1). Short-term temporary overvoltage: 1440 V, Long-term temporary overvoltage: 490 V |
| Scope of delivery |
Power cord, power plug adapter, USB cable, safety precautions, Quick Access Guide, detection pin, automatic correction jig, torque screwdriver, T-shaped hexagonal screwdriver, L-shaped hexagonal wrench, collet attaching/detaching jig, milling bur holder, milling bur positioner, Regulator, Adapter ID labels, Standard Adapter, open Edge Adapter, Adapter rack, pin-type workpiece Adapter, milling bur, etc.. |
