Just 1 click and out of the 3D printer comes the physical model of your patient's digital impression of the jaw situation. With BiSS Puzzle - it couldn't be easier.
BiSS Puzzle automates and links the steps required to create a 3D printable model file from an IO scan file in the Integrated Auto-Assistence Workflow (iAW). BiSS Puzzle thus follows our claim: "Fast. Simple. Intuitive." to software products from Promadent, which is also the basis for all previous modules of the BiSS Dental Software Suite. The complete automation of the digital workflow for the creation of 3D-printable model files with BiSS Puzzle means that manual operations, which were still required in some cases, are no longer necessary. Personnel resources, especially those of specialist staff, are conserved. If, for example, 15 IO scan data sets are prepared for printing per day in your practice or laboratory, this quickly adds up to more than 160 minutes of working time per day. That's 13 to 14 valuable hours of work time in a week. BiSS Puzzle independently accesses stored scan files from your intraoral scanner via Auto-File-Collect and imports them into the working environment. The scan files of the digital impression are then prepared into a 3D printable model file using the Integrated Auto-Design module (iAD), which is already successfully in use in the Biss Model Creator. Base, hollow out, attach base supports, label - these work steps are completely automated. The 3D printable model data sets are collected and placed by BiSS Puzzle on the virtual 3D printing platform of your 3D printer (auto-nesting). You then only have to click on "Print". Once a platform has been completely placed, the next one is automatically created. Depending on the printer type, e.g. die fits with different parameters and printer accuracies are reconstructed fully automatically so that the desired fits are achieved. Of course, the prepared model data sets (STLs) are available at any time for other advanced applications for BiSS users or can be sent to a partner milling center, for example.
PRINT - formerly Model-Creator - is the software for digital dental model creation. Precise, printable 3D models can be created easily and quickly from digital impression scans. The scan data is designed into a virtual dental model with an intuitive step-by-step workflow. PRINT can be used to define removable dies in the model or even complete segments. After purchasing the individual MILLING module, you can create a milling model from the previously defined dies in no time at all. With the "Implants" plug-in already integrated, you can quickly and easily integrate analogs into your model and create removable gingival masks. An extensive implant library is available to you for this purpose. Automatic hollowing and the creation of drainage channels are essential components for saving material and thus money. Jaw labels can be easily applied to the various base geometries and are an aid to patient assignment. Progress can be saved and archived in a compressed folder at any time.
The new way to produce milling models is digital. With BiSS MILLING - formerly Milling Models! Milling models can be designed in just a few minutes from intraoral and extraoral scan data imported in .STL, .OBJ and .PLY data formats. The step-by-step control already proven in PRINT is also a welcome relief in MILLING. This way, you will certainly succeed in quickly finding your way around the program. In this way, the digital dental laboratory runs through only a few, but sorted steps, such as defining the dies, base geometry, setting the height and distance to each other. The settings made are saved for the next job and ensure individualization of the program.
Create customized impression trays? Nothing could be easier with BiSS TRAYS - formerly Tray Generator! Developed in collaboration with dental technicians and dentists, TRAYS focuses on the essential steps relevant to impression tray design. With the individual module LOCATE, this is even possible for bite registrations and support pin registrations. The result is a well thought-out and streamlined workflow that guides you step by step to the finished product with numerous automatisms. However, the numerous optionally adjustable parameters ensure maximum flexibility, so that even the most specific customer requirements can be implemented. Individual trays can be designed in just a few minutes from intraoral and extraoral scan data imported in .STL, .OBJ and .PLY data formats. The digital dental lab thus goes through only a few, but sorted, steps such as defining the tray shape, blocking out the undercuts, creating wax walls if necessary, positioning the tray handle, labeling and perforating. The settings made are saved for the next job and ensure individualization of the program.
The creation of individual bite registrations and support pin registrations is child's play with BiSS LOCATE - formerly Bite Registration. Open file formats such as STL, PLY and OBJ can be imported into LOCATE from a wide variety of intraoral scanners. Developed in collaboration with dental technicians and dentists, the module focuses on the essential steps relevant to the design of bite registrations and support post registrations. In this way, you run through a repair assistant in the workflow, which cleans up fragments of the digital impression in a supportive manner in order to design and print the bite registrations and the support pin registration without interference. You have the option of designing your wax walls individually with grooves, with gutters, with a round end or with an open end. With the already integrated plugin "Pointer" you have the possibility to flexibly, individually and quickly combine a hole and a plate for the support pin with your predefined base. The result is a well thought-out and streamlined workflow that guides you step by step to the finished bite registration and the finished support pin registration. BiSS LOCATE relies on numerous automatisms to get you to your goal as quickly as possible.
With the purchase of a monthly, annual or 3-year subscription to the Premium Business, you acquire a dongle-bound multi-user network license (incl. 1 user) for PRINT, MILLING, TRAYS, LOCATE and PUZZLE.
- Windows 64-bit
- minimum 500 MB free file system memory, recommended 2 GB
- processor at least 2 cores at 2 GHz, recommended 4 cores at 2.5 GHz
- free RAM 8 GB, recommended 16 GB RAM
- free USB 2.0 port
- minimum screen resolution 900 x 1200 Pixels
graphics card: e.g. HD Graphics 3000 DX10.1 (we recommend not to use AMD/ATI RADEON graphics Cards)